Synchro MIG 180 - is a welding machine for MIG/MAG and MMA welding from the "Self Control" series in an improved version. For 5 kg wire roll. Adjustment of the welding current is done in two ways.
One is with only one potentiometer in the range of 30÷180A. Hence the name Synchro MIG - synchronous adjustment of arc voltage and wire feed speed.
Unlike other devices of the same type with synergistic control of voltage and wire speed (programmed ratio of the two variables) here the device itself determines the two values, looking for the optimal version of the voltage and wire speed.
The other way is "manual" control. In manual adjustment, the tension is set according to the thickness of the workpiece to be welded and then the wire feed speed is adjusted according to the set tension so that the machine enters the mode. Setup is as with a standard wire feeder.
The machine can also work in the MMA (manual arc welding) method. Because of the features it has, hot start, anti sticking function and Arc Force function to dynamically adjust the arc for easy ignition, it successfully welds rutile and basic base (steel) electrodes. It can weld stainless steel, alloy steel, carbon steel, cast iron, copper and other non-ferrous metals.
NEW!"WAVE PULSE" - This is a function that produces a pulsation of the welding arc by automatically changing the minimum and set current. Being able to adjust the duration of the two currents relative to each other. This feature is useful when welding on a vertical or ceiling, thus preventing weld pool runoff. It is also useful for novice welders because the welding process becomes slower.
NEW!"TIG"- There is an option to add welding function by "TIG" method. As it can be used to weld all metals WITHOUT aluminum. The functions it has are:
Welding current - 10-180A.
Contact burning - ignition of the welding arc by touching and separating the tungsten electrode to the workpiece to be welded.
Second current - besides the main welding current we have another function developed by us, the second current or manual pulse. This represents a second current that is set by the machine. It is activated by a second button on the welding hose handle. This is a very convenient option for novice welders and/or when welding details requiring increased attention. We ignite the arc by setting the base current so that we are on the verge of melting the weld material and forming a weld pool. At the moment when we want to create a weld pool and feed additional material, we press the back of the button, thus moving to a second higher current set by us, a weld pool is created and we can also add material. When we decide that we have had enough, we release the second button, the device switches to the first current again, the material cools down slightly, but the welding arc does not go out. When we decide to feed additional material again, we press the second button again. In this way, we form the pulses with which to weld, and here it is not necessary to "chase" the welding bath, because we determine when what should happen. This is a very useful function for welding workpieces of different thicknesses by setting one current to be relative to the thickness of one workpiece and the other current to the other workpiece. It is also useful when welding pipes.
Smooth decay - setting the time for the welding current to fall after stopping the process. This is a very necessary feature in TIG welding. It avoids cratering in the weld seam and also a burn-free finish.
Shielding gas purge - after process stop is fixed at 3 sec. If we want the time to be longer, after stopping the welding process and before the expiration of these 3 seconds. press the rear button (the second current), the gas will continue to flow as long as the button is held. In this way, we decide for ourselves how long it takes for the gas to escape. Because when welding at high currents, we need a larger discharge, but at the same time if we only want to drip at these currents, we do not need a long discharge and will only use up the gas bottle.
Price variants and models
EURO clutch and motor with AL housing - BGN 1,368 (without VAT BGN 1,140)
Addition of TIG function + hose - BGN 432 (without VAT BGN 360)
A potentiometer for adjusting the current in the hose can be added to all options - BGN 144 (without VAT BGN 120)